1/4" (50' Reel Box)

Marine Products

Built with Volusion

Visit our location!
150 Riberia Street
St. Augustine, FL 32085
Phone: (904) 829-2271

Check us out on
Facebook!

Marsupco

Home > Hose Diameter > 1/4" (50' Reel Box)

Sort By:

Page of 1

Trident Barrier Lined A1-15 Fuel Hose #365 (uncut)

Trident Barrier Lined A1-15 Fuel Hose #365 (uncut)

per foot

Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends) and diesel (including bio diesel blends). The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order and EPA Certified low permeation Type A1-15; and is NMMA Type Accepted & CE certified. This hose is built with the best fuel, fire and age resistant formulation and a unique "Barrier Liner" on inside surface of the tube, so fuel is not in direct contact with rubber. Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone. Also provides excellent bend-ability.

Trident Barrier Lined B1-15 Low Perm Fuel Line Hose #305 (uncut)

Trident Barrier Lined B1-15 Low Perm Fuel Line Hose #305 (uncut)

per foot

Trident Barrier Lined B1-15 Low Perm Fuel Line Hose for both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%). The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15; EPA Certified and CARB Executive Order for low permeation Type B1-15; and is NMMA Type Accepted & CE certified.

This hose is built with the best fuel and age resistant formulations and a unique "Barrier Liner" on inside surface of the tube, so fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone. It also provides excellent rope like bend-ability and fitting retention.

Trident HD Rubber Heater Hose #132 (uncut)

Trident HD Rubber Heater Hose #132 (uncut)

per foot

Cost effective, Hi Temp, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat; and serve a variety of boat and plant pressurized applications (water & air delivery).
#132: 2 spiral, 200PSI (1.38Mpa) WP.

Trident X HD Water/Heater Hose #134 (uncut)

Trident X HD Water/Heater Hose #134 (uncut)

per foot

Trident Clear PVC Tubing #150 (uncut)

per foot

Non-toxic FDA compounded PVC for many unpressurized, cool water uses like fresh water drain and vent lines. Operating tempratures (+20° - +150° F). NOT RECOMMENDED FOR BELOW-THE WATERLINE THRU-HULL CONNECTIONS.